LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (55 - Lids, Flaps -- CARRERA (997)) >> WM 551819 Removing And Installing Front Upper Part Of Lid Lock (All Models) >> Installing front upper part of lid lock >> Installing upper part of front lid lock

Installing upper part of front lid lock

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Installation Position Of Front Lid Lock Upper Part
G09824020Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Position upper part of front lid lock -2-  and tighten the fastening screws -1-  slightly.
    Fig 2: Installing Upper Part Of Front Lid Lock
    G09824021Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Adjust the upper part of lid lock -2-  in relation to the lid according to the noted position; determine gap left to right, if necessary.
  3. Tighten fastening screws -1-  . → : 9.7 Nm (7.0 ftlb.) 
  4. Check lid function.
scientia non olet · About LEMON Manuals