LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (55 - Lids, Flaps -- CARRERA (997)) >> WM 559019 Removing And Installing Rear Lid (All Models) >> Installing rear lid >> Notes

Installing rear lid: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Rear Lid
G09824129Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Mount the rear lid -2-  with the help of a second person.
    Fig 2: Installing Rear Lid
    G09824130Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Screw in the fastening screws -1-  until they just make contact.
  3. Adjust rear lid. → WM 559015 Adjusting rear lid  
  4. Tighten fastening screws M6 x 16 -1-  . Tightening torque → : 7.1 ftlb. 
scientia non olet · About LEMON Manuals