LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (55 - Lids, Flaps -- CARRERA (997)) >> WM 559119 Removing And Installing Rear Lid Hinge(All Models) >> Installing rear lid hinge

Installing rear lid hinge

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Lid Hinge
G09824161Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Roughly align the hinge -2-  according to the old attachment points.
    Fig 2: Installing Lid Hinge
    G09824162Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Screw in fastening screws (body side) M6 x 16 -1-  and tighten → : 7.1 ftlb.  .
scientia non olet · About LEMON Manuals