LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (55 - Lids, Flaps -- CARRERA (997)) >> WM 551719 Removing And Installing Front Lower Part Of Lid Lock (All Models) >> Installing front lower part of lid lock >> Installing lower part of lid lock

Installing lower part of lid lock

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Front Lower Part Of Lid Lock
G09824010Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Position cover panel -4-  and lower part of lid lock -3-  to the body and tighten using the fastening screws M6 x 16 -2-  . Tightening torque → : 7 ftlb. 
    Fig 2: Installing Lower Part Of Lid Lock
    G09824011Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals