LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (55 - Lids, Flaps -- CARRERA (997)) >> WM 559319 Removing And Installing Rear Pneumatic Spring (All Models) >> Installing rear pneumatic spring >> Function test on pneumatic spring

Function test on pneumatic spring

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open and close the lid several times to check function and assembly of the pneumatic spring.
  2. Open the lid fully. The pneumatic spring must hold the lid in its open position.
  3. Close the lid.
scientia non olet · About LEMON Manuals