LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (55 - Lids, Flaps -- CARRERA (997)) >> WM 558219 Removing And Installing Rear Lid Release Switch(All Models) >> Removing rear lid release switch

Removing rear lid release switch

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Installation Position Of Scuff Plate
G09824098Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Press the fastening ribs of the scuff plate outward using a small screwdriver and unclip the lid release switch.
scientia non olet · About LEMON Manuals