LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (55 - Lids, Flaps -- CARRERA (997)) >> WM 558219 Removing And Installing Rear Lid Release Switch(All Models) >> Installing rear lid release switch

Installing rear lid release switch

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clip the lid release switch into the fastening ribs of the scuff plate using the locking lugs until they engage securely.
scientia non olet · About LEMON Manuals