LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (55 - Lids, Flaps -- CARRERA (997)) >> WM 559019 Removing And Installing Rear Lid (All Models) >> Installing rear lid >> Locking wiring harness on rear lid

Locking wiring harness on rear lid

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Rear Lid
G09824131Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Push together electrical plug connection -1- -arrow A-  until locking tab is felt to engage.
    Fig 2: Locking Wiring Harness On Rear Lid
    G09824132Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Clipping wiring harness into place
scientia non olet · About LEMON Manuals