LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (55 - Lids, Flaps -- CARRERA (997)) >> WM 558619 Removing And Installing Lower Part Of Lid Lock At Rear (All Models) >> Installing lower part of lid lock at rear >> Installing the emergency release cable

Installing the emergency release cable

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Lower Part Of Lid Lock At Rear
G09824110Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Position emergency release cable -2-  on lower part of lid lock at rear -3-  and secure using circlip -1-  .
    Fig 2: Installing Emergency Release Cable
    G09824111Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals