Removing switching element for filler flap

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Overview Of Filler Flap Switching Element

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Release -arrow a- and pull off connector.

Fig 2: Disconnecting Connector For Switching Element
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Loosen the two fastening screws -1- and remove the filler flap switching element from the holder.

Fig 3: Identifying Filler Flap Switching Element From Holder
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Disengage switching element for filler flap from the emergency operation cable.

Fig 4: Disengaging Switching Element For Filler Flap From Emergency Operation Cable
Courtesy of PORSCHE CARS NORTH AMERICA, INC.