LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (55 - Lids, Flaps -- CARRERA (997)) >> WM 559037 Disassembling And Assembling Rear Lid (I-No. XAF) (Turbo Coupe, Turbo CABRIO) >> Disassembling rear lid >> Removing wire harness for rear lid

Removing wire harness for rear lid

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unclip wire harness using a plastic wedge -arrow A-  and remove it -arrow B-  .
    Fig 1: Removing Wire Harness For Rear Spoiler
    G09824146Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals