Section 4 (5X - Body General)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.

WM, 5X00IN01 Safety Instructions
- Safety Instructions For Raising Vehicles
  - Danger of injury when raising vehicles
  - Damage when raising vehicles
- General Warning Notes
- Safety Instructions For Adhesive Bonding
  - Danger of poisoning and injury when using adhesive
  - Safety instructions for Teromix-6700 two-component adhesive
- Safety Instructions For Assembly Work
  - Safety instructions for sharp-edged body and unit parts
  - Safety instructions for airbag system
- Safety Instructions For Corrosion Protection
  - Safety instructions for stopper location plan (body)
WM, 5X00IN02 Protection For Electric Components During Body Repairs
- Information On Electronic Control Units
WM, 5X00IN03 Corrosion Protection Measures During Repair Work
- Measures For Maintaining Long-Term Body Protection
- Prerequisite For Ensuring Validity Of The Long-Life Guarantee
  - Prerequisite for maintaining the long-life guarantee
    - Porsche long-life guarantee conditions
WM, 5X00IN04 Body Parts Of Various Sheet-Steel Strengths
- List Of Materials
- High-Strength Steel
- Very-High-Strength Steel
- Ultra-High-Strength Steel
- Separation Points
- Welding Work
WM, 5X00IN07 General Information And Notes On Quality
- Notes
- Battery Trickle Charge
  - Battery trickle charging
- Information On Control Units
- Information On Maintaining Long-Life Corrosion Protection Or The Long-Life Guarantee
  - Information on maintaining long-life corrosion protection
  - Information on maintaining the long-life guarantee
WM, 5X00IN08 Bonding Log
WM, 5X00IN10 Welding Aluminium
- Notes
- Welding Aluminium
WM, 5X00IN11 Stud Welding
- Notes
- Preparing For Stud Welding
- Welding Parameters
- Welding Studs
WM, 5X00IN20 Working With Body Structural Foam
- Notes
- General Information
- Structural Foam In Body Building
- Working With Body Structural Foam
WM, 5X00IN21 Working With Body Structural Adhesive Pah.071.781.00
- Notes
- General Information
- Information On Structural Bonding In Vehicle Manufacturing
- Working With Body Structural Adhesive Pah.071.781.00
WM, 5X00IN22 Working With Body Foam Filler
- Notes
- General Information
- Foam Filler In Body Building
- Working With Body Foam Filler
WM, 5X00IN23 Replacing Punch Rivets And Penetrated Joints
- Notes
- General Information
- Loosening Joint
- Making Joint
  - Setting blind rivets
  - Setting flow-form rivets
WM, 5X00IN24 Setting Self-Tapping Screws
- Notes
- General Information
- Setting Self-Tapping Screws
WM, 5X00IN25 Making Ground Connections
- Notes
- Making Ground Connection Using A Through Bolt
- Making Ground Connection Using A Rivet Nut
WM, 5X00IN26 Replacing Coarse Threaded Bolts
- Notes
- Replacing Coarse Threaded Bolts
- Subsequent Work
WM, 5X00IN33 Thread Repairs For Threaded Bushes With Collar
- Thread Repairs For Threaded Bushes With Collar
WM, 5X00IN34 Thread Repairs For Threaded Bushes Without Collar
- Notes
- Repair Procedure For Threaded Bush Without Collar
WM, 5X00IN61 Work Sequence For Accident Repairs
- Work Sequence For Accident Repairs
WM, 5X00IN62 Procedure For Damage Diagnosis
- Notes
- Procedure For Damage Diagnosis
- Identifiable Deformations On The Body Structure
- No Identifiable Deformations On The Body Structure
WM, 5X00IN83 Connecting Elements For Body Repairs
- Notes
- Connecting Elements For Body Repairs
WM, 5X00IN Technical Values
- Notes
- Technical Values
WM, 5X00IN Cavity Preservation
- Add-On Parts
- Unpainted BODYSHELL
  - Notes
  - Bottom Of Front Of Vehicle
WM, 5X00IN Data Plates
- Diagram: Data Plates
  - Front and right side of vehicle
WM, 5X00IN Underbody Protection
- Notes
- Tools And Materials
  - Tools
- Diagram: Underbody Protection
  - Overview diagram - lower side member and floor
  - Overview diagram - lower rear end
WM, 5X00IN Information On Aluminium Repairs
- Notes
- List Of Materials
- Damage Diagnosis
  - Repairs
    - Removing dents on accessories
- Occupational Safety
  - Corrosion protection measures
WM, 5X00IN Gap Dimension
- Notes
- Lighting
  - Gap dimensions of main headlights
- Windows
  - Front
    - Gap dimensions of front wing
- Gap Dimensions - Side
  - Gap dimensions of front door
- Front
  - Rear
    - Gap dimensions of rear lid
  - Gap dimensions of rear spoiler
WM, 5X00IN Exterior Colours
- Exterior Colours - Solid Paint System
- Exterior Colours - Metallic Paint System
WM, 5X00IN Vehicle Identification Number
- Notes
- Re-Imprinting New Vehicle Identification Number
  - Information
  - Spacer for replacing the vehicle identification number
- Encoding The Vehicle Ident. No
WM, 5X00IN Diagram: Stopper Plan
- Diagram: Stopper Plan
WM, 5X00IN Seam Seal
- Notes
- Add-On Parts
  - Instructions for sealing seams
  - Door
- Rear Lid
- Unpainted BODYSHELL
WM, 5X00IN Body Parts Of Various Sheet-Steel Strengths
- List Of Materials
- High-Strength Steel
- Very-High-Strength Steel
- Ultra-High-Strength Steel
- Separation Points
- Welding Work