LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (5X - Body General) >> WM, 5X00IN23 Replacing Punch Rivets And Penetrated Joints >> Loosening Joint >> Punch and bottom die pairs

Punch and bottom die pairs

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
Punch rivet  Pressing punch rivet joints out of two-layered panel joints with restricted access D3 + D5
Pressing punch rivet joints out of three-layered panel joints with restricted access D4 + D5
Pressing punch rivet joints out of two-layered panel joints S4 + D5
Pressing punch rivet joints out of three-layered panel joints S5 + D5
  1. The correct punch and bottom die pair for the punch rivet joint is specified in the table above.
  2. Press out punch rivet using a hydraulic riveting tool > VAS 6790 - Compact Booster  .
    G14269672Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Pressing out punch rivet

scientia non olet · About LEMON Manuals