LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (5X - Body General) >> WM, 5X00IN20 Working With Body Structural Foam >> Working With Body Structural Foam >> Processing conditions >> Notes

Processing conditions: Notes

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.

During processing, the ambient and material temperature must be at least > Minimum temperature 15°C  and must not exceed a maximum temperature of > Maximum temperature 28°C  .

Higher processing temperatures reduce processing time.

> Processing time at 20°C 90 min 

> Processing time at 28°C 60 min 

scientia non olet · About LEMON Manuals