WM, 5X00IN20 Working With Body Structural Foam: Notes
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
TOOL DESCRIPTION
| Tool denomination | Type | Tool number | Image |
|---|---|---|---|
| Hand-cartridge gun | Vehicle-specific workshop equipment | > V.A.G 1628 | |
| Pneumatic Gun, 18 bar | General workshop equipment | > VAS 6648 | |
| Pneumatic Cartridge Gun for Seam Sealing | General workshop equipment | > V.A.G 1761/1 |
TECHNICAL VALUE SPECIFICATION
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Minimum processing temperature | 000.043.305.87 | Minimum temperature | 15°C | ||
| Maximum processing temperature | 000.043.305.87 | Maximum temperature | 28°C | ||
| Structural foam bonding | 000.043.305.87 | Processing time at 20°C | 90 min | ||
| Structural foam bonding | 000.043.305.87 | Processing time at 28°C | 60 min | ||
| Minimum hardening temperature | 000.043.305.87 | Minimum temperature | 20°C | ||
| Maximum hardening temperature | 000.043.305.87 | Maximum temperature | 50°C | ||
| Assembly strength | 000.043.305.87 | Hardening time at 20°C | 12 h | ||
| Assembly strength | 000.043.305.87 | Hardening time at 50°C | 8 h | ||
| Endurance strength | 000.043.305.87 | Standing time at 20°C | 24 h |