Section 89 (On Board Diagnostic (OBD))
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
- Instrument cluster, On Board Diagnostic (OBD)
- General information
- On Board Diagnostic (OBD) of instrument cluster, initiating
- Check DTC Memory (function 02)
- Diagnostic Trouble Code (DTC) table
- Output Diagnostic Test Mode (DTM) (function 03)
- Erase DTC Memory (function 05)
- End Output (function 06)
- Code Control Module (function 07)
- Read Measuring Value Block (function 08)
- Initiating "Read Measuring Value Block"
- Display group overview
- Measuring value block 001
- Measuring value block 002
- Measuring value block 003
- Measuring value block 010
- Measuring value block 011
- Measuring value block 012
- Measuring value block 013
- Measuring value block 014
- Measuring value block 015
- Measuring value block 050
- Measuring value block 125
- Measuring value block 126
- Measuring value block 130
- Measuring value block 140
- Adaptation (function 10)
- Notes
- Adaptation table
- Initiating "Adaptation" function 10
- Resetting SRI after service
- Adaptation of fuel gauge
- Language version of driver information monitor
- Odometer display
- Adaptation of auxiliary heater
- Adaptation of fuel gauge sender resistance range
- Distance driven since service
- Time since service
- Minimum mileage performance
- Maximum mileage performance
- Maximum time interval
- Adaptation of oil quality
- Adaptation of total consumption quantity
- Adaptation for power train data-BUS
- Adaptation for comfort system databus
- Adaptation for information data-BUS
- Input values for replacing instrument cluster
- Data exchange between control modules, checking
- Anti-theft immobilizer, On Board Diagnostic
- General information
- Safety precautions
- Anti-theft immobilizer On Board Diagnostic (OBD), initiating
- Check Control Module Versions (function 01)
- Check DTC Memory (function 02)
- Diagnostic Trouble Code (DTC) table
- Erase DTC Memory (function 05)
- End Output (function 06)
- Read Measuring Value Block (function 08)
- Adaptation (function 10)
- Adaptation of vehicle keys
- Lost key procedure
- Adaptation after replacing the instrument cluster
- Adaptation after replacing the Engine Control Module (ECM)
- Adaptation after replacing the instrument cluster and the Engine Control Module (ECM)
- Login procedure
- Emergency start function using VAG 1551
- Cruise control system (CCS), On Board Diagnostic (OBD)
- Acoustic Parking System, On Board Diagnostic (OBD)
- General information
- Acoustic Parking System On Board Diagnostic (OBD), initiating
- Check Control Module Versions (function 01)
- Check DTC Memory (function 02)
- Diagnostic Trouble Code (DTC) table
- Erase DTC Memory (function 05)
- End Output (function 06)
- Code Control Module (function 07)
- Read Measuring Value Block (function 08)
- Adaptation (function 10)
- Automatic vertical headlight aim control, On Board Diagnostic (OBD)
- General information
- Automatic vertical headlight aim control, On Board Diagnostic (OBD), initiating
- Check Control Module Versions (function 01)
- Check DTC Memory (function 02)
- Diagnostic Trouble Code (DTC) table
- Output Diagnostic Test Mode (function 03)
- Basic Setting (function 04)
- Erase DTC Memory (function 05)
- End Output (function 06)
- Code Control Module (function 07)
- Read Measuring Value Block (function 08)
- VAS 5051 tester or VAG 1551 scan tool, connecting and selecting functions