Initiating coding
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
Indicated on display
Fig 1: V.A.G 1551 Scan Tool Display - Initiating Control Module Coding, Automatic Vertical Headlight Aim Control (1 Of 6)
- Press buttons -0- and -7- to select "Code Control Module" function 07.
- Press -Q- button to confirm input.
Indicated on display:
Fig 2: V.A.G 1551 Scan Tool Display - Initiating Control Module Coding, Automatic Vertical Headlight Aim Control (2 Of 6)
- Input code number using coding table. See Coding table
.
Example: 00001
Indicated on display (example only):
Fig 3: V.A.G 1551 Scan Tool Display - Initiating Control Module Coding, Automatic Vertical Headlight Aim Control (3 Of 6)
- Press -Q- button to confirm input.
Indicated on display (example only): after approx. 5 seconds:
Fig 4: V.A.G 1551 Scan Tool Display - Initiating Control Module Coding, Automatic Vertical Headlight Aim Control (4 Of 6)
- End coding with the --> button.
Indicated on display
Fig 5: V.A.G 1551 Scan Tool Display - Initiating Control Module Coding, Automatic Vertical Headlight Aim Control (5 Of 6)
- Press buttons -0- and -6-. This selects "End Output", function 06.
Indicated on display:
Fig 6: V.A.G 1551 Scan Tool Display - Initiating Control Module Coding, Automatic Vertical Headlight Aim Control (6 Of 6)
- Press -Q- button to confirm input.