LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 1997 >> A8 Quattro >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (On Board Diagnostic (OBD)) >> Instrument cluster, On Board Diagnostic (OBD) >> Adaptation (function 10) >> Adaptation for power train data-BUS >> Adaptation value

Adaptation value

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
ADAPTATION VALUE - POWER TRAIN DATA-BUS

Equipment  Adaptation value 
Engine 1
Transmission 2
Brake 4
A/C 8
ADR 32
Instrument cluster 1024

The installed control modules that participate in the power train data-BUS (Measuring value blocks. See MEASURING VALUE BLOCK 125  and MEASURING VALUE BLOCK 126  ) are added.

NOTE: The instrument cluster, which is CAN capable, is not indicated in the measuring value block, but must be added anyway.

Example: Manual transmission 

Example: Automatic transmission