Initiating "Adaptation" function 10

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

Indicated on display

Fig 1: V.A.G 1551 Scan Tool Display - Initiating Adaptation, Instrument Cluster (1 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Press buttons -1- and -0- to select "Adaptation" function 10.
Press -Q- button to confirm input.

Indicated on display

Fig 2: V.A.G 1551 Scan Tool Display - Initiating Adaptation, Instrument Cluster (2 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display:

Fig 3: V.A.G 1551 Scan Tool Display - Initiating Adaptation, Instrument Cluster (3 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Enter desired adaptation channel. See ADAPTATION TABLE .
Press -Q- button to confirm input.

NOTE: After changing an adaptation value or ending an adaptation channel, "Adaptation" function 10 must be performed again before selecting another adaptation channel.