Display group overview
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
DISPLAY GROUP OVERVIEW 001-011
| Display group number | Indicated on display |
|---|---|
| 001 | 1 = Road speed MPH 2 = Engine speed RPM 3 = Oil pressure switch 2 min 4 = Time h |
| 002 | 1 = Odometer miles 2 = Fuel gauge 1 3 = Tank sensor Ohm 4 = Outside air temperature |
| 003 | 1 = Engine coolant temperature °C |
| 010 | 1 = Channel 30 2 = Adaptation tank sensor 3 = Channel 9 4 = Odometer miles |
| 011 | 1 = Channel 4 2 = Language version 3 = Channel 3 4 = Consumption display (fuel gauge) |
DISPLAY GROUP OVERVIEW 012-015
| Display group number | Indicated on display |
|---|---|
| 012 | 1 = Channel 40 2 = Miles since service 3 = Channel 41 4 = Time since service |
| 013 | 1 = Channel 42 2 = Minimum value miles 3 = Channel 43 4 = Maximum value miles |
| 014 | 1 = Channel 44 2 = Max. time interval 3 = Unassigned 4 = Unassigned |
| 015 | 1 = Channel 45 2 = Oil quality 3 = Channel 46 4 = Total consumption quantity |
DISPLAY GROUP OVERVIEW 050-140
| Display group number | Indicated on display |
|---|---|
| 050 | 1 = Odometer miles 2 = Engine speed RPM 3 = Oil temperature °C 4 = Engine coolant temperature ° C |
| 125 | 1 = Engine 2 = Transmission 3 = ABS 4 = ADR (Autom. Distance Regulation) |
| 126 | 1 = A/C |
| 130 | 1 = Tire pressure 2 = Auxiliary heater 3 = Unassigned 4 = Parking assistance |
| 140 | 1 = Radio 2 = Telephone 3 = Navigation 4 = Telematic (Tele-data-processing) |
NOTE:
- For an instrument cluster replacement, data from display groups 10 - 15 must be printed out.
- Measuring value blocks 125 and 126 indicate the participants in the power train data-BUS.
- Measuring value block 130 indicates the participants in the comfort system databus.
- Measuring value block 140 indicates the participants in the information data-BUS.
- Display will always indicate the actual values obtained from the sensors. The values which appear on the instrument cluster are modified and may be different.
- If the actual engine coolant temperature is between 80° C and 100° C, instrument cluster will always show 90° C.