Adaptation of auxiliary heater

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

Indicated on display (example only):

Fig 1: V.A.G 1551 Scan Tool Display - Adaptation Of Auxiliary Heater (1 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Press -1- and -0- and confirm by pressing the -Q- button.

Indicated on display

Fig 2: V.A.G 1551 Scan Tool Display - Adaptation Of Auxiliary Heater (2 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display

Fig 3: V.A.G 1551 Scan Tool Display - Adaptation Of Auxiliary Heater (3 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Press -1- and -8-.
Press -Q- button to confirm input.
Indicated on display (example only): Adaptation value is indicated, here, for example 0.

Fig 4: V.A.G 1551 Scan Tool Display - Adaptation Of Auxiliary Heater (4 Of 9)
Courtesy of AUDI OF AMERICA, INC.

NOTE:

Adaptation value "0" is input if auxiliary heater is not installed.
Adaptation value "1" is input if an auxiliary heater is installed that is independent from engine condition (running or not).
Adaptation value "10" is input if an auxiliary heater is installed that is switched off when engine is not running.

Press --> button.
Indicated on display (example only):

Fig 5: V.A.G 1551 Scan Tool Display - Adaptation Of Auxiliary Heater (5 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Input adaptation value via keypad, fill initial positions with "0", e.g. 00001.
Indicated on display (example only):

Fig 6: V.A.G 1551 Scan Tool Display - Adaptation Of Auxiliary Heater (6 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.
Indicated on display (example only):

Fig 7: V.A.G 1551 Scan Tool Display - Adaptation Of Auxiliary Heater (7 Of 9)
Courtesy of AUDI OF AMERICA, INC.
Press -Q- button to confirm input.

Indicated on display (example only):

Fig 8: V.A.G 1551 Scan Tool Display - Adaptation Of Auxiliary Heater (8 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display (example only):

Fig 9: V.A.G 1551 Scan Tool Display - Adaptation Of Auxiliary Heater (9 Of 9)

Courtesy of AUDI OF AMERICA, INC.

End adaptation of the auxiliary heater by pressing the --> button.