Initiating "Read Measuring Value Block"

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

Indicated on display

Fig 1: V.A.G 1551 Scan Tool Display - Initiating Read Measuring Value Block, Instrument Cluster (1 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0- and -8- to select "Read Measuring Value Block" function 08.
Press -Q- button to confirm input.

Indicated on display:

Fig 2: V.A.G 1551 Scan Tool Display - Initiating Read Measuring Value Block, Instrument Cluster (2 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display:

Fig 3: V.A.G 1551 Scan Tool Display - Initiating Read Measuring Value Block, Instrument Cluster (3 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Enter display group number from table (See DISPLAY GROUP OVERVIEW ) and press -Q- button to confirm input.

The selected measuring value block is now displayed in standard form.