Perform basic setting

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

Press buttons -0- and -4- to select "Basic Setting" function 04.

Indicated on display:

Fig 1: V.A.G 1551 Scan Tool Display - Performing Basic Setting, Automatic Vertical Headlight Aim Control (1 Of 9)

G02729588

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display:

Fig 2: V.A.G 1551 Scan Tool Display - Performing Basic Setting, Automatic Vertical Headlight Aim Control (2 Of 9)

G02729589

Courtesy of AUDI OF AMERICA, INC.

Input display group number 001.
Press -Q- button to confirm input.

Indicated on display:

Fig 3: V.A.G 1551 Scan Tool Display - Performing Basic Setting, Automatic Vertical Headlight Aim Control (3 Of 9)

G02729590

Courtesy of AUDI OF AMERICA, INC.

Headlights are moved to set position.

Indicated on display:

Fig 4: V.A.G 1551 Scan Tool Display - Performing Basic Setting, Automatic Vertical Headlight Aim Control (4 Of 9)

G02729591

Courtesy of AUDI OF AMERICA, INC.

Headlights are now in the set position. Adjust headlights using headlight adjustment tool (e.g. VAS5046). Basic setting 1 switches the adjustment mode off and enters "headlights not set" into DTC memory.
Press --> button.

Indicated on display

Fig 5: V.A.G 1551 Scan Tool Display - Performing Basic Setting, Automatic Vertical Headlight Aim Control (5 Of 9)

G02729592

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0- and -4- to select "Basic Setting" function 04.

Indicated on display:

Fig 6: V.A.G 1551 Scan Tool Display - Performing Basic Setting, Automatic Vertical Headlight Aim Control (6 Of 9)

G02729593

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display:

Fig 7: V.A.G 1551 Scan Tool Display - Performing Basic Setting, Automatic Vertical Headlight Aim Control (7 Of 9)

G02729594

Courtesy of AUDI OF AMERICA, INC.

Input display group number 2.
Press -Q- button to confirm input.

Indicated on display:

Fig 8: V.A.G 1551 Scan Tool Display - Performing Basic Setting, Automatic Vertical Headlight Aim Control (8 Of 9)

G02729595

Courtesy of AUDI OF AMERICA, INC.

The control module has now learned this position as the adjustment position. The entry in DTC memory ("Headlights not set") is erased and adjustment mode is re-initiated.
Press --> button.

Indicated on display

Fig 9: V.A.G 1551 Scan Tool Display - Performing Basic Setting, Automatic Vertical Headlight Aim Control (9 Of 9)

G02729596

Courtesy of AUDI OF AMERICA, INC.