Distance driven since service

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

This function is used to input the distance in miles since the last service.

Indicated on display

Fig 1: V.A.G 1551 Scan Tool Display - Distance Driven Since Service (1 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Press -1- and -0- and confirm by pressing the -Q- button.

Indicated on display

Fig 2: V.A.G 1551 Scan Tool Display - Distance Driven Since Service (2 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Press -Q- button to confirm input.

Indicated on display:

Fig 3: V.A.G 1551 Scan Tool Display - Distance Driven Since Service (3 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Press buttons -4- and -0-.
Press -Q- button to confirm input.

Indicated on display (example only): Distance in miles since last service is indicated (here for example 8 represents 800 miles)

Fig 4: V.A.G 1551 Scan Tool Display - Distance Driven Since Service (4 Of 9)

Courtesy of AUDI OF AMERICA, INC.

NOTE:

Input of current specified value is only possible in units of 100 miles, indication in display also changes in 100 mile units.
Observe notes when replacing instrument cluster. See INPUT VALUES FOR REPLACING INSTRUMENT CLUSTER .
In countries where speedometers are calibrated in miles, adaptation can be performed in miles.
It is only possible to input values via direct input using the keypad of the scan tool.