Safety precautions
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
If special testing equipment is required during road test, note the following:
WARNING:
- To reduce the risk of accident during road tests, always proceed as follows:
- Only the VAS 5051 may be used for reading out measuring value blocks. Always secure scan tool to the rear seat and have operated from there by a second technician.
To reduce the risk of personal injury and/or damage of electric and electronic components, always observe the following:
- Always switch ignition off before connecting or disconnecting test/measurement tools.
- It is possible that the control module will recognize a malfunction and store a DTC during some tests. After completing all tests and repairs, DTC memory should therefore be checked and erased if necessary.
- Always switch ignition off before disconnecting or connecting battery. Failure to do so may damage electronic control modules.