Input values for replacing instrument cluster: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Audi S8, 2003 Audi A8, 2002 Audi S8, 2002 Audi A8, and 2001 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
The following must always be observed when replacing the instrument cluster:
NOTE:
- Instrument cluster must always be coded.
- Note the values indicated in measuring value blocks 10 - 15 on the VAG 1551 scan tool before replacing.
- Adaptation channels 42 - 44 must not be transferred to the new instrument cluster.
- Note odometer reading before replacing and input according to instructions.
- In countries with speedometers calibrated in miles, adaptation of the Service Reminder Indicator (SRI) can be performed in miles.