Section 787 (5X - Body - General)

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

WM 5X00IN Safety instructions
- Safety instructions for raising vehicles
  - Danger of injury when raising vehicles
  - Damage when raising vehicles
- General warning notes
- Safety instructions for adhesive bonding
  - Danger of poisoning and injury when using adhesive
  - Safety instructions for Teromix-6700 two-component adhesive
- Safety instructions for assembly work
  - Safety instructions for sharp-edged body and unit parts
  - Safety instructions for airbag system
- Safety instructions for corrosion protection
  - Safety instructions for stopper location plan (body)
WM 5X00IN Protection for electric components during body repairs
- Information on electronic control units
WM 5X00IN Corrosion protection measures during repair work
- Measures for maintaining long-term body protection
- Prerequisite for ensuring validity of the long-life guarantee
  - Prerequisite for maintaining the long-life guarantee
    - Porsche long-life guarantee conditions
WM 5X00IN Body materials
- List of materials - add-on parts
- List of materials - body structure
- High-strength steel
- Very-high-strength steel
- Ultra-high-strength steel
- Separation points
- Welding work
WM 5X00IN Sealing elements
- Sealing elements
WM 5X00IN General information and notes on quality
- Tools
- Battery trickle charge
  - Battery trickle charging
- Information on control units
- Information on maintaining long-life corrosion protection or the long-life guarantee
  - Information on maintaining long-life corrosion protection
  - Information on maintaining the long-life guarantee
WM 5X00IN Welding aluminum
- Tools
- Technical values
- Welding aluminum
WM 5X00IN Stud welding
- Tools
- Technical values
- Preparing for stud welding
  - Notes
  - Welding studs
WM 5X00IN Working with body structural foam
- Tools
- Technical values
- General information
- Structural foam in body building
- Working with body structural foam
  - General information
  - Preparing bonding surfaces
WM 5X00IN Working with body structural adhesive PAH.071.781.00
- Tools
- Technical values
- General information
- Information on structural bonding in vehicle manufacturing
- Working with body structural adhesive PAH.071.781.00
  - General information
  - Preparing bonding surfaces
WM 5X00IN Processing body foam filler
- Technical values
- General information
- Foam filler in body building
WM 5X00IN Replacing punch rivets and penetrated joints
- Tools
- General information
- Loosening joint
- Connecting joint
  - Setting blind rivets
  - Setting flow-form rivets
WM 5X00IN Setting self-tapping screws
- Tools
- Technical values
- General information
- Setting self-tapping screws
WM 5X00IN Making ground connections
- Tools
- Technical values
- Making ground connection using a through bolt
  - Notes
  - Making ground connection using a rivet nut
WM 5X00IN Replacing coarse threaded bolts
- Tools
- Technical values
- Replacing coarse threaded bolts
- Subsequent work
WM 5X00IN Thread repairs for threaded bushes with collar
- Thread repairs for threaded bushes with collar
WM 5X00IN Thread repairs for threaded bushes without collar
- Tools
- Technical values
- Repair procedure for threaded bush without collar
WM 5X00IN Technical values
- Technical values
WM 5X00IN Gap dimensions
- Technical values
- Overview of outer gap dimension for body
- Gap dimensions for body front section
- Gap dimensions for windscreen
- Gap dimensions for roof and sliding roof
- Gap dimensions for front door/rear door/side window
- Gap dimensions for sill cover
- Gap dimensions for tank cap
- Gap dimensions for tail lights
- Gap dimensions for rear end
- Gap dimensions - 55 - Rear lid
WM 5X00IN Seam seals
- Technical values
- Seam seals
WM 5X00IN Underbody protection
- Technical values
- Underbody protection
WM 5X00IN Cavity preservation
- Cavity preservation
WM 5X00IN Vehicle identification number
- Encoding vehicle identification number
WM 5X00IN Replacing identification plate
- Replacing identification plate
WM 5X00IN Diagram: Stopper plan
- Unpainted bodyshell
WM 5X00IN Work sequence for accident repairs
- Work sequence for accident repairs
WM 5X00IN Procedure for damage diagnosis
- Tools
- Notes
- Procedure for damage diagnosis
- Identifiable deformations on the body structure
- No identifiable deformations on the body structure
WM 5X00IN Diagram - key to symbols for welding work
- Diagram - keys to symbols for welding work
WM 5X00IN Connecting elements for body repairs
- Connecting elements for body repairs
WM 5X00IN Exterior colors
- Exterior colors - Solid
- Exterior colors - Metallic
- Exterior colors - Special color