Safety instructions for air conditioning
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Danger of injury! Bursting of the filled air-conditioning system during welding and brazing work!
- Danger of injury due to the filled air-conditioning system bursting during welding and brazing work.
→ No welding, brazing or hot-air heating may be performed on parts of the filled air-conditioning system!
→ While drying after painting work, the temperature burden on the vehicle must not exceed two hours at a maximum temperature of 80°C!
→ Make sure that parts of the air-conditioning system do not heat up during welding or brazing work on the vehicle!
→ In the case of extreme heating of filled air-conditioning systems, a very strong overpressure may be caused in the system which may lead to an explosion.