Technical values -55- Front lid

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

TORQUE SPECIFICATION

Location	Type	Basic value
Fastening nut for front lid	Tightening torque	20 Nm (15 ft. lb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fastening screw for upper part of lid lock, front	Tightening torque	8 Nm (6 ft. lb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fastening screws for lid hinge	Tightening torque	20 Nm (15 ft. lb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fastening screw for rubber stop, rear	Tightening torque	8 Nm (6 ft. lb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fastening screw for guide plate	Tightening torque	8 Nm (6 ft. lb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fastening nut for front lock	Tightening torque	8 Nm (6 ft. lb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.