Processing conditions
WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
During processing, the ambient and material temperature must be at least → Minimum temperature: 15°C and must not exceed a maximum temperature of → Maximum temperature: 28°C .
Higher processing temperatures reduce processing time. Processing can be interrupted briefly for up to 5 minutes.
→ Processing time at 15°C: 20 min
→ Processing time at 28°C: 15 min
The chemical reaction is essentially complete after approx. 30 minutes. The hardened foam does not swell or shrink.