Front Axle -- Repair (G42)
- 31 00 General Information
- 31 10 Front Axle Mounting
- 31 10 000 Removing and installing complete front axle (230i)
- 31 10 035 Removing and installing/replacing the left crash lever
- 31 10 036 Removing and installing/replacing the right crash lever
- 31 10 001 Completely removing and installing front axle with engine and transmission (M240i)
- 31 10 000 Removing and installing complete front axle (M240i xDrive)
- 31 10 001 Completely removing and installing front axle with engine and transmission (M240i xDrive)
- 31 11 Front Axle Carrier
- 31 12 Front Control Arms, Front Wheel Bearings
- 31 12 001 Replacing left or right wishbone (RWD)
- 31 12 050 Removing and installing/replacing left or right tension strut (RWD)
- 31 21 090 Replacing left/right swivel bearing (RWD)
- 31 21 180 Replace front wheel bearings (RWD)
- 31 21 090 Replacing left/right swivel bearing (AWD)
- 31 21 180 Replace front wheel bearings (AWD)
- 31 31 Front Shock Absorbers
- 31 33 Front Coil Springs
- 31 35 Front Anti-Roll Bar
- 31 50 Front Differential
- 31 51 Front Differential/Seal
- 31 51 015 Replace radial shaft seal for left output shaft (230i xDrive, M240i xDrive)
- 31 51 020 Replacing radial shaft seal for right output shaft (230i xDrive, M240i xDrive)
- 31 51 600 Replacing both dust plates (drive flange removed) (230i xDrive, M240i xDrive)
- 31 51 060 Replacing O-ring for right front differential (M240i xDrive)
- 31 51 065 Replacing the O-ring for bearing bracket (M240i xDrive)
- 31 53 Front Right Output Shaft Bracket
- 31 60 Front Output Shafts
- Notes on removing and installing Low Profile band clamps
- 31 60 003 Removing and installing/replacing left output shaft (230i xDrive, M240i xDrive)
- 31 60 004 Removing and installing/replacing right output shaft (230i xDrive, M240i xDrive)
- 31 60 530 Replacing one output shaft bellows (output shaft removed) (230i xDrive, M240i xDrive)
- 31 60 535 Replacing two bellows of the output shaft(s) (output shaft(s) removed) (230i xDrive, M240i xDrive)