Section 19 (Transmission System (Clutch - Service Information - 6-Speed Manual - 02Q))
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
- 30 Clutch
- Clutch Mechanism
- Overview - Pedal Assembly
- Overview - Clutch Hydraulics
- Overview - Clutch Release Mechanism
- Clutch Pedal, Removing And Installing
- Over-Center Spring, Removing And Installing
- Return Spring, Removing And Installing
- Mounting Bracket, Removing And Installing
- Bearing Bushing, Removing And Installing
- Clutch Master Cylinder, Removing And Installing
- Clutch Slave Cylinder With Release Bearing, Removing And Installing
- Clutch Mechanism Lines, Removing And Installing
- Bleeder, Removing And Installing
- Clutch Mechanism, Bleeding
- Clutch Master And Clutch Slave Cylinder, Checking
- Clutch Position Sensor -G476-, REMOVING AND INSTALLING
- Clutch Release Mechanism, Servicing
- Clutch
- Clutch Manufacturers, Differentiating
- Overview - Clutch
- Clutch, Removing And Installing
- Clutch, Removing And Installing, With Dual Mass Flywheel, SACHS
- Notes
- Removing
- Installing
- Clutch Plate Installed Position
- Check the Ends of the Diaphragm Spring
- Checking the Pull-Springs and Rivet Connection
- Checking the Spring Connections and Rivet Connections
- Centering the Clutch Plate, Removing and Installing the Pressure Plate on Engines with a Crankshaft with a Smaller Diameter, or Engines with a Needle Bearing in the Crankshaft.
- Tightening Specifications
- Clutch, Removing And Installing, With Dual Mass Flywheel, LUK
- Clutch, Removing And Installing, With Single Flywheel
- Clutch, Removing And Installing, With Dual Mass Flywheel, SACHS
- Special Tools
- Clutch Mechanism