Clutch Mechanism Lines, Removing And Installing: Installing
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Connect hose/line assembly -1- with clutch master cylinder.
-- Pull on the line to make sure it is secure.
-- Push the hose/line assembly -4- with the O-ring -3- onto the bleeder connection -1- until the clip -2- audibly locks into place.
-- Pull on the line to make sure it is secure.
- After removing the :3094 , the return hose -2- (→ previous illustration) must be formed back into its original shape.
-- Bleed the clutch mechanism. Refer to CLUTCH MECHANISM, BLEEDING .
-- Install the air filter housing.
- Vehicles with turbo diesel engine. Refer to AIR FILTER [For engine(s) CRUA]
- Vehicles with a gasoline engine. Refer to AIR FILTER [For engine(s) CNSB, CNSA, CXBB, CXBA, CXCB, CXCA]
Continuation for All
-- Install the battery tray, battery and the battery cover. Refer to BATTERY .