Clutch, Removing And Installing, With Dual Mass Flywheel, SACHS: Removing
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
- The transmission is removed.
-- Insert the : 3067 to loosen the bolts.
When Removing, Loosen the Bolts as Follows So That the Clutch Pressure Plate Does Not Distort (Causing Shuddering on Acceleration):
-- Loosen the bolt diagonally in small steps.
- When loosening, the stop -2- and the bolt -1- must loosen up together.
-- If the stop does not loosen: push the bolt toward the dual mass flywheel.
-- Remove the pressure plate and the clutch plate.