LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Transmission System (Clutch - Service Information - 6-Speed Manual - 02Q)) >> 30 Clutch >> Clutch >> Clutch, Removing And Installing >> Clutch, Removing And Installing, With Dual Mass Flywheel, SACHS >> Checking the Spring Connections and Rivet Connections

Checking the Spring Connections and Rivet Connections

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
GWWV30-0454Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Check the spring connections between the pressure plate and the cover for cracks and make sure the rivet connections are tight.

-- Use the :3067  when installing.

GWWN30-10000Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Engines Having a Crankshaft with a Smaller Diameter arrow, or Engines Having a Needle Bearing arrow in the Crankshaft

GWWN34-10979Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.