Bleeder, Removing And Installing: Notes
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Hose Clamps - Up To 25 mm:3094
- Sealing Tool:T10249
-- Remove the air filter housing if it makes the bleeder inaccessible.
- Vehicles with turbo diesel engine. Refer to AIR FILTER [For engine(s) CRUA]
- Vehicles with a gasoline engine. Refer to AIR FILTER [For engine(s) CNSB, CNSA, CXBB, CXBA, CXCB, CXCA]
-- Clamp off the hose to the clutch master cylinder using :3094 .
NOTE:
A slight deformation of the hose remains after the :3094 have been removed.
The hose is not faulty.
After removing the :3094 , the hose must be formed back into its original shape.