Clutch Slave Cylinder With Release Bearing, Removing And Installing: Removing
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
-- Open the clip -2- with a screwdriver or a pointed tool and remove bleeder -4- from clutch slave cylinder -1-.
 Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
|
-- Remove the bolts -arrows-.
 Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
|
-- Remove the clutch slave cylinder together with the release bearing -A-.