LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Transmission System (Clutch - Service Information - 6-Speed Manual - 02Q)) >> 30 Clutch >> Clutch Mechanism >> Clutch Master Cylinder, Removing And Installing >> Installing

Clutch Master Cylinder, Removing And Installing: Installing

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following: 

Replace mounting pin after removing.

-- Install the mounting bracket. Refer to MOUNTING BRACKET, REMOVING AND INSTALLING .

-- Install the Clutch Position Sensor -G476-. Refer to Clutch Position Sensor -G476-, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals