Hose/Line Assembly or Pipe 4 on Bleeder 1, Removing and Installing
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
-- To remove, release the clip -2- with a screwdriver or a pointed tool and pull off hose/line assembly or pipe -4- from the bleeder -1-.
-- To install, press hose/line assembly or pipe with new O-ring -3- onto the bleeder connection, until clip audibly engages.
-- Pull on the line to make sure it is secure.