Release Bearing With Additional Plastic Washer
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Identified by: tabs -arrow- on the plastic washer.
Only for Release Bearing with Additional Plastic Washer: Pressure Plate Diaphragm Spring (arrows) with a Slightly Lower Installation Height.
- Install the release bearing with additional plastic washer and the pressure plate diaphragm spring with a slightly lower installation height.