LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Transmission System (Clutch - Service Information - 6-Speed Manual - 02Q)) >> 30 Clutch >> Clutch Mechanism >> Clutch Slave Cylinder With Release Bearing, Removing And Installing >> Notes

Clutch Slave Cylinder With Release Bearing, Removing And Installing: Notes

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

NOTE:

The clutch slave cylinder and the release bearing are a single unit and are replaced together.

Pay attention to the thread pitch on the bolts when cleaning the threaded hole in the clutch housing.

scientia non olet · About LEMON Manuals