Bearing Bushing, Removing And Installing: Installing
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn the valve fitter such that the openings -1- or pin -2- are visible.
The openings -1- and the pin -2- face in the same direction.
-- Fit the bearing bushing -A- in the openings -1- and rotate into place.
-- Use a new mounting pin to connect the valve fitter/clutch master cylinder to the clutch pedal.
-- Connect the battery. Refer to BATTERY .