Removing and Installing the Bleeder 4 from the Clutch Slave Cylinder
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
-- To remove, release the clip -2- with a screwdriver or a pointed tool and remove the bleeder -4- from the clutch slave cylinder -1-.
-- To install, check the O-ring -3- on the clutch slave cylinder. Press in the bleeder at the clutch slave cylinder connector until the clip -2- engages audibly.
-- To check, pull on the bleeder.
-- Bleed the clutch mechanism. Refer to CLUTCH MECHANISM, BLEEDING .