Bearing Bushing, Removing And Installing: Removing
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect the battery ground cable. Refer to BATTERY .
-- Press together the retainers in direction of -arrows- and remove the studs -1- to the right side.
-- Turn the valve fitter such that the openings -1- or pin -2- are visible.
The openings -1- and the pin -2- face in the same direction.
-- Remove the bearing bushing -A- from the openings -1-.