Overview - Clutch, With Single Flywheel

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Clutch, With Single Flywheel

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Flywheel
- Removing and installing. Refer to CYLINDER BLOCK, TRANSMISSION SIDE [For engine(s) CNSB, CNSA, CXBB, CXBA, CXCB, CXCA] or CYLINDER BLOCK, TRANSMISSION SIDE [For engine(s) CRUA] .
- Make sure it fits securely on the centering pins
- Keep the clutch lining contact surface free of grooves, oil and grease
Clutch Plate
- Centering. Refer to CLUTCH, REMOVING AND INSTALLING, WITH SINGLE FLYWHEEL
Pressure Plate
- Removing and installing. Refer to CLUTCH, REMOVING AND INSTALLING, WITH SINGLE FLYWHEEL .
- Checking the ends of the diaphragm spring. Refer to Check the Ends of the Diaphragm Spring
- Checking the spring connections and rivet connections. Refer to Check the Spring Connection and Rivet Connections
Bolt
- M 6: 13 Nm
- M 7: 20 Nm
- Loosen and tighten in small steps and in diagonal sequence