Clutch, Removing And Installing, With Dual Mass Flywheel, SACHS: Notes
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Flywheel Retainer:3067
- Alignment Tool - Clutch Plate:T10097
- Torque Wrench 1331 5-50Nm:VAG1331
- Grease for Clutch Plate Shaft Splines.
Special tools and workshop equipment required
- On engines which have a crankshaft with a smaller diameter, or engines with a needle bearing in the crankshaft. Refer to Centering the Clutch Plate, Removing and Installing the Pressure Plate on Engines with a Crankshaft with a Smaller Diameter, or Engines with a Needle Bearing in the Crankshaft. :3176
.