Clutch Position Sensor -G476-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the driver seat as far back as possible.
-- Remove the driver side footwell cover, if equipped. Refer to DRIVER SIDE FOOTWELL COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -arrow- from the Clutch Position Sensor -G476-.
-- Release the Clutch Position Sensor -G476- -2- on the clutch master cylinder -1- -arrow- and remove it.