Clutch Master Cylinder, Removing And Installing: Removing

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Before replacing the clutch master cylinder due to a suspected defect, perform the "Guided Fault Finding". Refer to Vehicle Diagnostic Tester first.

When working inside the footwell, cover the carpet with cloths to protect it from leaking brake fluid.

-- Remove the mounting bracket. Refer to MOUNTING BRACKET, REMOVING AND INSTALLING .

-- Remove the Clutch Position Sensor -G476-. Refer to Clutch Position Sensor -G476-, REMOVING AND INSTALLING .

-- Release retainers in direction of -arrows- and remove mounting pin -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove clutch master cylinder -1-.