Section 183 (Supplemental Restraint System -- XE/(760))
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Supplementary Restraint System (G1823241)
- Specifications
- Description And Operation
- Diagnosis And Testing
- Airbag And Safety Belt PRETENSIONER Supplemental Restraint System (G1823152)
- Principles Of Operation
- Safety Information
- Inspection And Verification
- Seat Position Sensor - Notes On Removal/Replacement
- SRS AK2 Type Connectors
- Occupant Classification Sensor Control Module (OCSCM)
- Occupant Classification Sensor Control Module (OCSCM) Existing Module Programming
- Occupant Classification Sensor Control Module (OCSCM) New Module Replacement And Programming
- DTC Index
- Airbag And Safety Belt PRETENSIONER Supplemental Restraint System (G1823152)
- General Procedures
- Removal And Installation
- Front Door Side Impact Sensor (G1818492)
- CLOCKSPRING (G1818493)
- C-Pillar Side Impact Sensor (G1818494)
- Front Impact Severity Sensor (G1818495)
- Front Impact Sensor - Project 8 (G2248429)
- Impact Pressure Sensor - Project 8 (G2250426)
- Driver Airbag - Project 8 (G2248426)
- Driver Airbag Module (G1818496)
- Passenger Airbag Module (G1818497)
- Passenger Airbag - Project 8 (G2248427)
- Occupant Classification Sensor (G1856528)
- Restraints Control Module (G1818498)
- Restraints Control Module - Project 8 (G2248431)
- Side Air Curtain Module (G1818499)
- Side Air Curtain - Project 8 (G2248428)
- Side Airbag Module (G1842193)
- Side Airbag - Project 8 (G2278627)