Seat Position Sensor - Notes On Removal/Replacement
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
NAS vehicles have a seat position sensor fitted to both the driver and passenger-side seats.
The seat position sensor, a hall-effect sensor, is fitted to the underside of both the driver and passenger-side seats on NAS vehicles. It should be noted that these sensors cannot be re-installed when removed. If any work is undertaken that requires removal of the seat position sensor, a NEW sensor MUST be fitted. Note that different sensors are fitted to left and right seats, so care should be taken to make sure the correct replacement parts are installed